Huawei Switch S220-24P4X (24*GE ports(400W PoE+), 4*10GE SFP+ ports, built-in AC power)

Introducing the innovative Huawei Switch S220-24P4X, a premier networking solution that embodies efficiency, reliability, and forward-thinking technology. The S220-24P4X is meticulously designed to cater to the dynamic needs of modern businesses, offering unparalleled network performance.

Imagine a network backbone that is not only robust but also intelligent. The Huawei S220-24P4X is the epitome of this, with 24 Gigabit Ethernet ports that support high-speed data transmission and seamless connectivity for a multitude of devices. The switch’s prowess is further amplified by its 4 10G SFP+ ports, providing high-speed uplink connections that ensure your network is always running at peak efficiency.

Efficiency in network traffic management is crucial, and the Huawei Switch S220-24P4Xshines with built-in Quality of Service (QoS) features and Link Aggregation Control Protocol (LACP). These functionalities prioritize critical network traffic and improve data throughput, assuring that essential applications perform at their best without interruptions.

With the Huawei S220-24P4X, integrating advanced technology into your existing network is effortless. This switch is designed for easy setup and management, offering a user-friendly interface that makes network administration simple, even for those with minimal technical know-how. Its intelligent management system allows you to effortlessly configure and monitor network performance, ensuring optimal operation.

Dependability and endurance are hallmarks of the Huawei S220-24P4X, crafted to withstand the rigors of continuous business operations. Its commitment to energy efficiency is not just good for the environment but also cost-effective, lowering operational expenses over the long term.

Choose the Huawei S220-24P4X for a network that is both powerful and prepared for future expansion. This switch represents an investment in your network’s growth and reliability. For businesses seeking to advance their network infrastructure with minimal fuss and maximum gain, the Huawei Switch S220-24P4X stands ready to exceed expectations. Contact us to explore how this state-of-the-art network switch can transform your operational efficiency and provide a seamless networking experience.

Components

Figure 4-10 S220-24P4X appearance

1	One MODE button	2	Twenty-four 10/100/1000BASE-T PoE+ ports
3	Four 10GE SFP+ ports	4	One console port
5	One RST button NOTICE: To restore the factory settings and reset the device, hold down the button for at least 6 seconds. To reset the device, press the button. Resetting the device will cause service interruption. Exercise caution when you press the button.	6	Ground screw NOTE: It is used with a ground cable.
7	Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch.	8	AC socket NOTE: It is used with an AC power cable.

Ports

Table 4-29 Ports on the S220-24P4X

Port	Connector Type	Description	Available Components
10/100/1000BASE-T port	RJ45	A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.	Ethernet cable
10GE SFP+ port port	SFP+	A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.	GE eSFP optical modules GE-CWDM eSFP optical modules GE-DWDM eSFP optical modules GE SFP copper module 10GE SFP+ optical modules 10GE-CWDM SFP+ optical modules 10GE-DWDM SFP+ optical modules 1 m and 3 m SFP+ high-speed copper cables 10 m SFP+ AOC cables
Console port	RJ45	The console port is connected to a console for on-site configuration.	Console cable

Indicators and Buttons

Figure 4-11 Indicators on the Switch

Table 4-30 Description of indicators on the switch

No.	Indicator	Name	Color	Status	Description
1	PWR	Power module indicator	–	Off	The switch is powered off.
			Green	Steady on	The power supply is normal.
2	SYS	System status indicator	–	Off	The system is not running.
			Green	Fast blinking	The system is starting.
			Green	Steady on	During the system startup preparation phase, the SYS indicator is steady green, which lasts for a maximum of 30 seconds.
			Green	Slow blinking	The system is running normally.
			Red	Steady on	The system does not work normally after registration, or a fan alarm or a temperature alarm has been generated.
3	PoE	PoE indicator	–	Off	The PoE mode is not selected.
			Green	Steady on	The PoE mode is selected, and service port indicators show the PoE status of each port.
4	MODE	Mode switch button	–	–	When you press this button once, the service port indicators change to the PoE mode and show the PoE status of each service port. When you press this button a second time, the service port indicators restore to the default mode and show the connection status and link activity of each service port. If you do not press the MODE button within 45 seconds, the service port indicators restore to the default mode. In this case, the PoE indicator is off.
5	–	Service port indicator (one indicator for each port)	Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top.		Meanings of service port indicators vary in different modes. For details, see Table 4-31. NOTE: If a power failure occurs on a device’s PCB board, indicators of the last four GE or 10GE optical ports on the device’s front panel blink green cyclically at an interval of 1 second, with each indicator illuminating for 0.25 seconds.
6	CLOUD	Cloud indicator	–	Off	The device is not in the cloud management state.
			Blue	Fast blinking	The device is connecting to the cloud.
			Blue	Slow blinking	The device is in the cloud management state.

Table 4-31 Description of service port indicators in different modes (one indicator for each port)

Display Mode	Color	Status	Description
Default mode	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port.
	Green	Blinking	The port is sending or receiving data.
PoE mode	–	Off	The port is not providing power to a powered device (PD).
	Green	Steady on	The port is providing power to a PD.
	Green	Blinking	The power of the PD connected to the port exceeds the power capacity of the port or the power threshold configured on the port. Alternatively, the PD does not comply with IEEE standards.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules. The built-in power module can provide 400 W PoE power, which ensures full PoE power on 24 ports in compliance with 802.3af or on 13 ports in compliance with 802.3at.

Heat Dissipation System

The switch has two built-in fans for forced air cooling. Air flows in from the left side and front panel, and exhausts from the right side.

When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device