Description

Huawei AP160 Wireless LAN Equipment

Item	Details
Description	AP160(11ax indoor,2+2 dual bands, smart antenna)
Part Number	50086816
Model	AP160
First supported version	V200R023C00

Appearance

Figure 5-46 Appearance of the AP160

Ports

Figure 5-47 Ports on the AP160
Click to enlarge

GE0/PoE_IN

GE1

Table 5-72 Ports on the AP160

Port	Connector Type	Description	Available Components
GE0/PoE_IN	RJ45	10/100/1000M auto-sensing Ethernet electrical port that connects to the wired Ethernet and supports PoE input.	Network cable
GE1	RJ45	Ethernet electrical port that supports 10/100/1000M auto-sensing and connects to the wired Ethernet.	Network cable

Indicators and Buttons

Figure 5-48 Indicators and buttons on the AP160
Click to enlarge

The indicator is located inside the panel, which turns on after the AP is powered on.

Indicator

Default

Table 5-73 Indicators on the AP160

Silkscreen	Name	Color	Status	Description
–	System indicator	Green	Steady on	The AP is just powered on and the software is not started yet.
		Green	Steady on after blinking once	After the system is reset and starts uploading the software, the indicator blinks green once. Until the software is uploaded and started, the indicator remains steady green.
		Green	Slow blinking (0.5 Hz)	The AP runs in Fat or Fit mode, the Ethernet connection is normal, and STAs are associated with the AP.
		Green	Slow blinking (0.2 Hz)	The AP runs in Fat or Fit mode, the Ethernet connection is normal, and no STA is associated with the AP.
		Green	Blinking once every 0.25s (4 Hz)	The AP works in Fat or Fit mode. The software is being upgraded. In Fit mode, the AP is requesting to go online or fails to go online.
		Blue	Slow blinking (0.5 Hz)	The AP works in cloud mode, has gone online on the cloud management controller, and is running properly.
		Blue	Blinking once every 0.25s (4 Hz)	The AP works in cloud mode and is connecting to the cloud management controller (including reconnection after disconnection).
		Red	Steady on	A fault that affects services has occurred, such as a DRAM detection failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually.

Table 5-74 Buttons on the AP160

Silkscreen	Name	Description
Default	Reset button	For versions earlier than V200R023C10, if you press the button, the device resets; if you hold down the button for more than 6 seconds, the device restores the factory settings, switches to the Fit mode, and restarts. For V200R023C10 and later versions, if you press the button, the device resets; if you hold down the button for more than 6 seconds, the device restores the factory settings, switches to the cloud mode, and restarts.

Technical Specifications

Table 5-75 Technical specifications of the AP160

Item	Specification
Installation Type	Junction Box
Dimensions without packaging (H x W x D) [mm(in.)]	86 mm x 86 mm x 42.5 mm (3.39 in. x 3.39 in. x 1.67 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	98 mm x 117 mm x 73 mm (3.86 in. x 4.61 in. x 2.87 in.)
Weight without packaging [kg(lb)]	0.14 kg (0.31 lb)
Weight with packaging [kg(lb)]	0.24 kg (0.53 lb)
Storage	NAND Flash 256 MB
Console port	None
Maximum power consumption [W]	9.1 W
Maximum heat dissipation [BTU/hour]	29.5 BTU/hour
Power supply mode	PoE
Input voltage range [V]	PoE: 802.3af
Service port surge protection	PoE port: Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B
Maximum number of physical ports on the entire device	GE (RJ45) x 2, 10M/100M/1000M auto-sensing
Long-term operating temperature [°C(°F)]	0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)]	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa]	53kPa – 106kPa ETSI 300 019-2-3
Ground	floating ground
BLE	Not supported
Radio number	2
Operating frequency band	2.4GHz 5GHz
MIMO spatial streams	Radio 0 (2.4 GHz): 2×2 Radio 1 (5 GHz): 2×2
Wi-Fi standard	2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax
Radio interface	Built-in smart antennas
Antenna gain	2.4 GHz: 3 dBi/chain (peak value) 3 dBi (combined gain) 5 GHz: 2 dBi/chain (peak value) 1 dBi (combined gain)
Maximum transmit power	2.4G: 17 dBm/chain 20 dBm (combined power) 5G: 17 dBm/chain 20 dBm (combined power)
Singal radio transmit power [dBm]	2.4 GHz: 0 dBm to 17 dBm/chain 5 GHz: 0 dBm to 17 dBm/chain
MTBF [year]	446 year
MTTR [hour]	2 hour
Frequency stability [ppm]	+/-20
802.3bt power supply description	No function is limited.
802.3at power supply description	No function is limited.
802.3af power supply description	No function is limited.
DC power supply description	Not supported