APCSmart-UPSRT5000VA230V,4.5KWatts/5.0kVA

Key Features Output Output power capacity: 3.5 KWatts / 5.0 kVA Max Configurable Power (Watts): 3.5 KWatts / 5.0 kVA Nominal Output Voltage: 230V Output Voltage Note: Configurable for 220: 230 or 240 nominal output voltage Efficiency at Full Load: 92.0 % Output Voltage Distortion: Less than 3% Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Other Output Voltages: 220, 240 Load Crest Factor: 3 : 1 Topology: Double Conversion Online Waveform type: Sine wave Output Connections: (8) IEC 320 C13 (Battery Backup)/ (4) IEC Jumpers (Battery Backup)/ (2) IEC 320 C19 (Battery Backup) Bypass: Internal Bypass (Automatic and Manual) Input Nominal Input Voltage: 230V Input frequency: 50/60 Hz +/- 5 Hz (auto sensing) Input Connections: Hard Wire 3-wire Input voltage range for main operations: 160 – 280V Input voltage adjustable range for mains operation: 100 – 280 (half load) V Efficiency at Full Load: 92.0 % Other Input Voltages: 220, 240 Batteries & Runtime Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte(leakproof) Included Battery Modules: 2 Typical recharge time: 2.5hour(s) Replacement Battery: Expected Battery Life (years): 3 – 5 RBC Quantity: 1 Extendable Run Time: 1 Extended Run Options: Communications & Management Interface Port(s): RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot Pre-Installed SmartSlot™ Cards Control panel: LED status display with load and battery bar-graphs and On Line: On Battery: Replace Battery: Overload and Bypass Indicators Audible Alarm: Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm Emergency Power Off (EPO): Yes Surge Protection and Filtering Surge energy rating: 555JJoules Filtering: Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time : meets UL 1449 Physical Height X Width X Depth: 432mm X 130mm X 660mm Rack Height: 3U Net Weight: 54.43KG Shipping weight: 63.64KG Height X Width X Depth: 347mm X 603mm X 980mm Color: Black Master Carton Units: 1.0 Units per Pallet: 6.0 Environmental Operating Temperature: 0 – 40 °C Operating Relative Humidity: 0 – 95% non-condensing % Operating Elevation: 0-3000meters Storage Temperature: -15 – 45 °C Storage Relative Humidity: 0 – 95% non-condensing % Storage Elevation: 0-15000meters Audible noise at 1 meter from surface of unit: 55.0dBA Online thermal dissipation: 1057.0BTU/hr Protection Class: IP 20 Conformance Approvals: C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, UL 1778, VDE Standard warranty: 2 years repair or replace, optional on-site warranties available, optional extended warranties available Sustainable Offer Status RoHS: Compliant PEP: Available in Documentation tab EOLI: Available in Documentation tab Output power capacity 4.5kWatts / 5.0kVA Output Connections (6) IEC 320 C13 (Battery Backup) (2) IEC Jumpers (Battery Backup) (4) IEC 320 C19 (Battery Backup) Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections Hard Wire 3 wire (1PH+N+G) APC Smart-UPS SRT 5000VA 230V High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Comms cable, Documentation CD, Installation guide, Removable support feet, Temperature Probe, USB cable, Warranty card, Web/SNMP Management Card 10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Smart-UPS On-Line Features & Benefits Availability Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Scalable runtime Allows additional run time to be quickly added as needed. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Manageability InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. SmartSlot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit and power status with visual indicators. Serial connectivity Provides management of the UPS via a serial port. Network manageable Provides remote power management of the UPS over the network. Protection Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs) Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Serviceability Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Audible alarms Provides notification of changing utility power and UPS power conditions Disconnected battery notification Warns when a battery is not available to provide backup power. Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Marketing Features Low operating and maintenance costs with proven reliability and intelligent battery management. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Save time with easy and convenient remote/network accessibility. Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities. Avoids costly power problems by keeping your IT equipment and data protected and available. Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events. Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards. Adaptability Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/Tower convertible